How to draw Monster Truck in nine steps

Today we will teach you how to draw a Monster truck, step by step.In the beginning we will show you some data about Monster truck.(Information is taken from Wikipedia)

A monster truck is a specialized truck with a heavy duty suspension, four-wheel steering, and oversized tires constructed for competition and entertainment uses. Originally created by modifying stock pickup trucks and sport utility vehicles (SUVs), they have evolved into purpose-built vehicles with tube-frame chassis and fiberglass bodies rather than metal. A competition monster truck is typically 12 feet (3.7 m) tall, and equipped with 66-inch (1.7 m) off-road tires.

Monster trucks developed in the late 1970s and came into the public eye in the early 1980s as side acts at popular motocross, tractor pulling, and mud bogging events, where they were used in car-crushing demonstrations. Today they are usually the main attraction with motocross, mud bogging, ATV racing, or demolition derbies as supporting events.

Monster truck shows typically have two main events, a race and a freestyle competition. Races are conducted as a single-elimination tournament on short, symmetrical tracks, which may include obstacles such as junk cars or dirt mounds. The length and complexity of the track can vary with the size of the venue, with courses in indoor arenas typically being shorter with fewer obstacles.

In freestyle events, each driver puts on a performance consisting of stunts such as obstacle jumps, backflips, wheelies, and doughnuts. A panel of judges assign points to each performance and the driver with the most points is declared the winner. Historically, additional vehicles for the drivers to crush, such as motor homes and school buses, were placed on the track specifically for the freestyle event. However, incidences of debris flying into the stands and causing serious injuries have influenced most event promoters to turn away from such obstacles. Most freestyle courses now consist mostly of large mounds and ramps erected to allow the trucks to perform large jumps and wheelies upon landing. Freestyle performances have a set time limit and only one truck is allowed on the track at a time as a safety measure. Freestyle events are typically the final competition of a show, as damage to the trucks would make them unable to race.

Let's start with the first step

We start the drawing from the front, drawing an elongated square, but you must carefully perceive the space before you start drawing.

Step two

After we have finished the front part, with a line we also draw the bottom part of the monstar truck, the spaces for the wheels, the rear part of the pipe to the top part.

Step three

We continue the line at the top of the car, the windshield of the car, the engine part and a dividing line at the door.

Step four

Now we draw the part on the car that are usually the lights, we detail the door and the door, the car lock, the side mirror as well as the small signal on the front wheel.

Step five

Flags on the hinge part, and the rear wheel along with the fleece and details

Step Six
The system of automatic springs between the rear and rear wheels

Step seven
Draw the front wheel along with the details of the tire and the rim.
Step eight
Front tire on the other hand which is also seen along with the damping details.

Step nine
We came to the last step, ie the end of the drawing, we draw the headlights of the car together with the mask, we detail all the wheels, we detail the tires and all the other details in the drawing. After we have completed all these steps, we can paint the tires in black and the car in the color you want, but only by shading can we make the drawing look as beautiful as possible. We hope you have learned to draw a Monster Truck